GloboFleet
®
Downloadkey II user manual | © 2014 Buyond GmbH | 5
Data transfer to Computer
Plug in the downloadkey in a free USB-Port on your
computer. When GloboFleet CC Plus is installed on
your system, the data stored on your downloadkey
will be transfered to your computer automatically. Al-
ternatively you can download and save the data ma-
nually. The downloadkey will work as a normall USB-
stick when connected to your computer.
Format downloadkey
Start the conguration tool and click on „format down-
loadkey“. You can also format the downloadkey like
a normall USB-stick on your computer: Right click on
the symbol of the downloadkey in your le-manager
and choose „format“.
You only need to format the downloadkey when no
storage capacity is left. After you formatted the down-
loadkey remove it from your computer and plug it in
the USB-port again.
Attention:
Do not connect the downloadkey simultaneously to a tacho-
graph and a personal computer (USB extension cable)! This
may cause considerable damage to the downloadkey.
To Next Page
Loading...
Need help?
General