GloboFleet Downloadkey II User Manual

10 | GloboFleet
®
Downloadkey II user manual | © 2014 Buyond GmbH
Downloadkey –
Conguration-Tool
The GloboFleet downloadkey is set from the facto-
ry to the since last download setting. The rst time
a read-out operation is performed the entire memory
of the tachograph is read. This process may take se-
veral hours depending on the age of the tachograph.
You can congure the downloadkey to suit your
needs. (See p.11)
The GloboFleet downloadkey congurator is already
part of the Card Control Plus Software and located
under „Tools - Congure download key“. If you do not
possess this software, you can install the congurator
with the supplied mini-CD.
To do this place the CD in your drive and follow the
instructions after the startup. If the installation does
not start automatically run the installer from the CD.
If you have a 64-bit operating system please use the
64-bit version:
GloboFleet_DKC_x64_Setup.exe
Note:
Make sure that the USB power saving feature of your opera-
ting system is disabled. It is recommended to use the USB
ports on the back of the computer.

GloboFleet Downloadkey II Specifications

General

Brand	GloboFleet
Model	Downloadkey II
Category	Control Unit
Language	English