2.2 Health hazards >>
.
You may be exposed to hazards that could injure you when handling the
device. Always comply with the following safety information/safety measures:
!
Changes or improvements to the device are not permitted without the agreement of the
manufacturer! Never bypass, modify or remove the safety equipment.
2.3 Danger due to damage to equipment >>
Improper use can
cause damage to the device! For this reason, observe the following safety instructions:
!
The device must not be pressurised for extended periods.
!
Do not store the device in livestock buildings due to the ammonia vapours (dan-
ger of brass cracking), do not fill with solutions containing nitrogen or phosphates.
3
Before using the device
3.1
Delivery status
>>
The device is shipped as standard as follows (see figure on page 2):
A Safety/vent valve
B Pump
C Filling funnel
D Adapter for hose connection
E Schlauchleitung
F Fill level indicator
G Base
H 1 x user manual and product information (not shown)
4 Technical data
Type: Water feeding device Type 10
Item no.: 1215.0000
Max. capacity: 10 L
Total tank capacity: 12.2 L
Max. operating pressure : 3 bar
Max. operating temp.: 0°C to +40°C
Full pressure change
0 bar to 6 bar: max. 5000 load cycles
Tank material: Polyethylene
Empty weight: 2.17 kg
CAUTION
ATTENTION
To Next Page
Loading...