55
4000123944-2
20 Replacement of Parts
SEAL
FRONT
CASING
PANEL
SEALED
CHAMBER
COVER
Diagram 20.29
9771
20.40 Sealed chamber cover seal, refer to
diagram 20.29
Before starting refer to the front of Section 20 Important
information.
• Remove the front panel, refer to Section 17.3.
• Remove the sealed chamber cover, refer to Section 17.5.
• Remove the old seal, thoroughly clean the casing. Fit the new
seal, it is supplied to the correct length.
Note: Ensure the seal is fitted correctly giving an air tight seal.
To Next Page
Loading...
