www.glow-worm.co.uk
6
Boiler Design and Clearances
Description
These boilers are designed to provide central heating from a
fully pumped open vented or sealed water system and domestic
hot water using a fully indirect cylinder.
Once the controls are set the boiler operates automatically.
Pluming from ue terminal
Like all condensing boilers it will produce a plume of condensation
from the ue terminal in cool weather. This is due to the high
efciency and hence low ue gas temperature of the boiler.
It is normal and not a fault indication.
Compartment or Cupboard Installations
Ventilation is not required for compartment or cupboard
installations. Do not use the compartment or cupboard for
storage.
Diagram 1
13204
To Next Page
Loading...
