Glow-worm Ultrapower sxi Series - Diagnostic Menu Parameters (Level 1)

54
Diagram 14.4
14 Fault Finding
13737
Indicates read and write function - all other diagnostics are read only
Diagnostic Menu - Level 1 Installer Access
Outside temperature
Domestic hot w
ater demand
d.99 State List (see table opposite)
d.24 System water pressure in bar.
d.28 Option Relay 2 Reserved for future use
d.27 Option Relay 1 Reserved for future use
d.91 Internal Programmer type 0:24 hour 1:7 day (default)
d.92 Enable/Disable Internal Programmer 0: CH Off, DHW Off
1: CH Off, DHW On
2: CH On, DHW Off
3: CH On, DHW On (Default)
Domestic hot water flow temperature reading
Tank setpoint
Tank temperature
Domestic hot w
ater setpoint
Flow temperature setpoint
Description Range
intelligent
control
> 80 no flame < 40 good flame
Minutes
Ignitions / 100
Ignitions / 100