Quick Guide to GlucoMen LX
1. Start the meter.
Press for more than 3 seconds. For a moment,
the screen will show all symbols.
2. Set the time.
The digits for hour blink. Browse and select by
pressing or . Confi rm with .
Set the minutes in the same way.
3. Set the year, month and day.
Select the year by pressing or . Confi rm with .
Select the month in the same way. Confi rm with .
Select the day in the same way. Confi rm with .
4. Set the sound.
Press or to activate the sound (you can choose
whether the meter has sound or is silent).
Select ”on” or ”off”. Confi rm with .
5. Save by pressing down for longer than
3 seconds.
How to set the time, date and sound.
State the following Apoteket item
number when you order:
GlucoMen
®
LX Sensor, 50 Test Strips
Apoteket item no. 22 01 84
GlucoMen
®
Lancets Fine, 200 Lancets
Apoteket item no. 20 47 15
Glucoject
®
Dual Lancing Device, 1
Apoteket item no. 20 47 11
Error codes.
E-0
Software error. Call customer support 040-32 12 70.
E-1
System error with hardware. Call customer support 040-32 12 70.
E-2
Wrong usage temperature. Temperature is outside the limits
(5°C–45°C). Let the meter and the test strips warm up or
cool off.
E-3
Wrong or previously used test strip. Take a new test strip.
E-4
Blood test error. Incorrect test. Take a new test strip.
E-xx
Other fi gure than above. Call customer support 040-32 12 70.
0:00
The battery has been changed. Set the time and date.
Customer support 040-32 12 70 or info@menarinidiagnostics.se
Time
Date
Left button
On/off-button
Right button
How to get the meter results from the memory.
1. Start the meter with the -button and the latest
meter result is shown in the display.
2. Press to scroll back in time (max 400 values).
Press to go forward.
3. Average value; turn on the meter with the -button.
Press again and the meter shows the day’s
average. Continue to press to show the latest
7, 14 and 30-day averages.
4. Keep pressed down longer than 3 seconds in
order to turn off the meter.
To Next Page
Need help?
General
