4.
Engage
the
power take-off.
If you are going
to
drive the vehicle, shift the transmission
into
the gear
you
want. Then shift
the
transfer case into the range
you
want, apply
the
regular brakes and release
the
parking brake.
When you release the clutch, the power take-off will start.
5.
Release the clutch (and the regular brakes)
as
you
normally would.
Using
a
Transfer Case Mounted Power Take-Off
(Automatic Transmission)
I.
Set the parking brake.
2.
Shift the transfer case into
“N”
(Neutral).
3.
Shift
the
transmission into “N” (Neutral).
4.
Engage the power take-off.
If you are going to drive the vehicle, shift the transfer case into the
range you want. Then apply the regular brakes and release the parking
brake.
5.
Shift the transmission
to
“D” (Drive) to start the power take-off.
6.
Release the regular brakes
to
drive the vehicle.
Towing
a
Trailer
4-36
To Next Page
Loading...
