GMC ACADIA 2017 - Clock

GMC Acadia/Acadia Denali Owner Manual (GMNA-Localizing-U.S./Canada/
Mexico-9803770) - 2017 - crc - 7/12/16
Instruments and Controls 119
System (GPS) antenna,
StabiliTrak
®
, and vehicle speed
information.
The compass system is designed to
operate for a certain number of
miles or degrees of turn before
needing a signal from the GPS
satellites. When the compass
display shows CAL, drive the
vehicle for a short distance in an
open area where it can receive a
GPS signal. The compass system
will automatically determine when a
GPS signal is restored and provide
a heading again. See Compass
Messages 0 149 for the messages
that may be displayed for the
compass.
Clock
Base Radio
The infotainment system controls
are used to access the time and
date settings through the menu
system. See Operation 0 181 on
how to use the menu system.
Setting the Time and Date
When Auto Set is enabled the time
cannot be manually set.
1. Press
{, then touch
SETTINGS.
2. Touch Time and Date, then Set
Time or Set Date.
3. Touch + or − to adjust the
value.
4. Touch
R or Q to adjust AM or
PM for 12 hour format.
5. Touch
0.
Using Auto Set
1. Press {, then touch
SETTINGS.
2. Touch Time and Date, then
Auto Set.
3. Select from the available
selections.
4. Touch
0.
Setting the 12/24 Hour Format
1. Press {, then touch
SETTINGS.
2. Touch Time and Date, then
select 12h or 24h format.
3. Touch
0.
Setting the Month and Day
Format
1. Press {, then touch
SETTINGS.
2. Touch Time and Date, then Set
Date Format.
3. Select DD/MM/YYYY (day/
month/year), MM/DD/YYYY
(month/day/year), or YYYY/
MM/DD (year/month/day)
format.
4. Touch
0.
Uplevel Radio Using Faceplate
Controls
To set the time or date:
1. Select Home Page, then select
SETTINGS.
2. Select Time and Date, then the
desired function.
3. Turn the MENU knob to
increase or decrease the value.