EasyManuals Logo

GMC C-Series 2001 User Manual

GMC C-Series 2001
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #283 background imageLoading...
Page #283 background image
7-5
Scheduled Maintenance
The services shown in this schedule up to 100,000 miles
(166 000 km) should be performed after 100,000 miles
(166 000 km) at the same intervals. The services shown
after 100,000 miles (166 000 km) should be performed
at those same intervals.
This vehicle has a computer that lets you know when to
change your engine oil. This is not based on mileage,
but on engine revolutions and engine operating
temperature. When the computer has calculated that the
oil needs changing, the Oil Life Monitor will indicate
that a change is necessary.
The “Footnotes” at the end of this Maintenance
Schedule further explain maintenance services.
See “Scheduled Maintenance Supplements” earlier in
this section.
1,000 Miles (1 600 km)
j
Wheel stud nut service. (46)
3,000 Miles (5 000 km)
j
Check Oil Life Monitor. If engine oil and filter
are changed, reset monitor. See “Engine Oil”
in the Index. (3)(9)
j
Check fluid levels (or every 3 months, whichever
occurs first). (1)(2)(6)
j
Clutch pedal free travel service. (10)
j
Rear axle air shift motor service. (11)
6,000 Miles (10 000 km)
j
Check Oil Life Monitor. If engine oil and filter
are changed, reset monitor. See “Engine Oil”
in the Index. (3)(9)
j
Check fluid levels (or every 3 months, whichever
occurs first). (1)(2)(6)
j
Chassis lubrication service (or every 6 months,
whichever occurs first). (12)
j
Lubricate door hinge pins and rollers with engine oil.
j
Wheels and tires service. (15)(46)
(Continued)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GMC C-Series 2001 and is the answer not in the manual?

GMC C-Series 2001 Specifications

General IconGeneral
BrandGMC
ModelC-Series 2001
CategoryAutomobile
LanguageEnglish

Related product manuals