GMC C-Series 2001 User Manual

2-36
Turn Signal/Multifunction Lever
The lever located on the left side of the steering column
includes the following:
D Turn and Lane Change Signals
D Headlamp High/Low
-Beam Changer
D Windshield Wipers
D Windshield Washer
D Cruise Control (If Equipped)
D Power Take-Off (PTO) (If Equipped)
Turn and Lane Change Signals
The turn signal has two upward (for right) and
two downward (for left) positions. These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows don’t
flash but just stay on, check the turn signal flasher and
circuit breaker. See “Fuses and Circuit Breakers” in
the Index.
If a bulb is burned out, replace it to help avoid an accident.
If the arrows don’t go on at all when you signal a turn,
check the circuit breaker and for burned
-out bulbs.
(See “Fuses and Circuit Breakers” in the Index.)

GMC C-Series 2001 Specifications

General

Brand	GMC
Model	C-Series 2001
Category	Automobile
Language	English