2-37
Signal-Stat Turn Signal and Hazard Warning
Flasher (If Equipped)
If you have this signal system, it is mounted beside or
behind the multifunction lever on the left side of the
steering column.
To signal a turn, move the lever all the way up or down.
When the turn is completed, move the lever back to the
center position.
An arrow on the instrument panel cluster will flash in
the direction of the turn when the lever is in the up or
down position.
This system replaces the turn signal feature on the
multifunction lever only. All other features such as
headlamp high/low beam, windshield wipers and
washer, etc. remain part of the multifunction system.
If you have this system, see “Signal
-Stat Turn Signal
and Hazard Warning Flasher” in the Index to find out
how the hazard warning flasher portion works.
To Next Page
Loading...
