2-43
Using Cruise Control on Hills
How well your cruise control will work on hills depends
upon your speed, load and the steepness of the hills.
When going up steep hills, you may want to step on the
accelerator pedal to maintain your speed. When going
downhill, you may have to brake or shift to a lower gear
to keep your speed down. Of course, applying the brake
or clutch takes you out of cruise control. Many drivers
find this to be too much trouble and don’t use cruise
control on steep hills.
Ending Cruise Control
There are different ways to turn off the cruise control:
D
Step lightly on the brake pedal.
D
Push the clutch pedal, if you have a
manual transmission.
D
Move the cruise switch to OFF.
Erasing Speed Memory
When you turn off the ignition, your cruise control set
speed memory is erased.
To Next Page
Loading...
Need help?
General
