Need help?Do you have a question about the GME TX3100 and is the answer not in the manual?
Allows programmable control of scanning, channel memories, and selected feature options.
Minimizes interference and optimizes reception by fine-tuning frequency.
Automatically adjusts audio output for constant speaker volume.
Allows scanning of programmable UHF CB channels.
Enables duplex on specific channels for repeater use.
Detailed LCD with backlighting for clear visibility.
Allows display flipping for upside-down mounting.
Fits into small locations for installation.
Built-in systems for quiet channel operation.
Detects and warns of excessive voltage conditions.
Uses advanced assembly techniques for performance and reliability.
Product is designed and manufactured locally.
Identifies key controls like microphone socket, power, volume, scan, squelch, and LCD.
Explains icons and displays on the LCD screen.
Steps to open the squelch to hear background noise.
Steps to close the squelch to silence the receiver.
Guide to adjust squelch sensitivity from -1 to -9.
Steps to select CTCSS or DCS tones for quiet operation.
Steps to temporarily open squelch to check channel clarity.
How to add or remove channels from scan memory.
Procedure to initiate the scanning function.
Procedure to cancel the scanning function.
Explanation of scan function behavior with busy channels.
Wiring configuration for continuous power.
Wiring configuration for ignition-switched power.
Details on the operating temperature range.
Electrical specifications including voltage, current, and protection features.
Technical specifications for the radio's transmitter.
Overview of statutory consumer rights.
Details of the manufacturer's warranty policy.
To Next Page
General
