EasyManua.ls Logo

GME TX4600 - User Manual

GME TX4600
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
TX4600 INSTRUCTION MANUAL PAGE 1
Ingress protected 5 watt UHF CB radio
INSTRUCTION MANUAL
32 pp FOLDED ONCE TO 116 X 185 MM STITCHED WITH 2 WIRES
PRINT CMYK ON 130 GSM GLOSS ART
42333-8_TX4600 IM.indd 1
28/08/13 11:21 AM

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the GME TX4600 and is the answer not in the manual?

Summary

Important Information Concerning UHF CB Radio

Emergency Channels

Details allocated channels for emergency use, including primary simplex and repeater input channels.

Features

Transmit (TX)

Details programmable duplex function for repeater or simplex operation based on channel.

Scanning and Memory Functions

Covers microprocessor controlled frequency synthesis, seek function, and programmable scan functions.

Privacy Functions

Details Selcall, unique page mode, quiet mode, and CTCSS for private channel operation.

Controls

General Operation

Transmitting

Guides on checking channel availability and using the PTT button for transmission with microphone placement.

Squelch Control

Details how to open and close the squelch to eliminate background noise and the 'BUSY' indicator.

Squelch Sensitivity

Discusses adjusting squelch sensitivity for different environments and available preset settings.

CTCSS

Scanning

Selective Calling

SelCall Identification Number

Explains the unique SelCall ID, its display on power-up, and its function in identifying calls.

The Quiet Mode (Q)

Allows monitoring a channel quietly until one's own SelCall Ident is received, then alerts the user.

Using Selcall

Entering a SelCall Ident

Step-by-step guide to entering a 5-digit SelCall Ident using the CALL button and function keys.

Sending a Selcall

Instructs user to press and hold the CALL button for 2 seconds to transmit the entered SelCall Ident.

Naming Your Selcall Idents

Entering and Storing a Selcall Name

Receiving Selcalls

Cancelling the Selcall Alert

Activating the Quiet Mode

Receiving Signals in the Quiet Mode

Group Calling

Programming and Sending Group Calls

Programming the Frequencies

To Program a Frequency into a Channel

Step-by-step instructions to program frequencies into Listening channels using MENU and CALL keys.

Seek Mode

Enabling the Seek Mode

Details prerequisites and steps to enable Seek mode, which scans frequencies for activity.

Scanning for Active Frequencies in the Seek Mode

Guides user on scanning for active frequencies and storing them into listening channels.

Setting Seek Mode Frequency Limits

Explains setting upper and lower frequency limits for the Seek function to narrow the search band.

Menu Settings

Setting the Squelch Sensitivity

Selecting Duplex

CTCSS Tones

Installation

DC Connections

Explains connecting the RED (positive) and BLACK (negative) power leads to the vehicle's battery or fuse box.

Installing the Unit

Guides user on mounting the unit using the bracket, drilling holes, and securing with appropriate hardware.

Antenna Installation

UHF CB Operating Frequencies

CTCSS Tone Frequency Chart

Specifications

Electrical

Details electrical specifications including compliant standards, frequency ranges, channels, voltage, and protection features.

Transmitter

Lists transmitter specifications such as RF output, emissions, modulation, and audio signal to noise ratio.

Receiver

Outlines receiver specifications including circuit type, intermediate frequencies, and current consumption.

Standard Communications Contract Warranty Against Defects

Warranty Against Defects

States warranty terms, excluding or limiting implied conditions and offering repair or replacement for defects.

Warranty Period

GME TX4600 Specifications

General IconGeneral
Channel Capacity80 channels
Power Output5W
Water ResistanceIP67
Operating Voltage7.4V
SpeakerBuilt-in

Related product manuals