GME TX6155 - Dual Watch; Dual Watch Operation; Dcs Tone Chart

PAGE 16 INSTRUCTION MANUAL TX6155 / TX685
DSC TONE CHART
DCS CODE DCS CODE DCS CODE DCS CODE DCS CODE DCS CODE
1 023 19 116 37 225 55 325 73 452 91 627
2 025 20 122 38 226 56 331 74 454 92 631
3 026 21 125 39 243 57 332 75 455 93 632
4 031 22 131 40 244 58 343 76 462 94 654
5 032 23 132 41 245 59 346 77 464 95 662
6 036 24 134 42 246 60 351 78 465 96 664
7 043 25 143 43 251 61 356 79 466 97 703
8 047 26 145 44 252 62 364 80 503 98 712
9 051 27 152 45 255 63 365 81 506 99 723
10 053 28 155 46 261 64 371 82 516 100 731
11 054 29 156 47 263 65 411 83 523 101 732
12 065 30 162 48 265 66 412 84 526 102 734
13 071 31 165 49 266 67 413 85 532 103 743
14 072 32 172 50 271 68 423 86 546 104 754
15 073 33 174 51 274 69 431 87 565 - -
16 074 34 205 52 306 70 432 88 606
17 114 35 212 53 311 71 445 89 612 - -
18 115 36 223 54 315 72 446 90 624 - -
Dual Watch
The Dual Watch mode lets you to monitor two channels at the same time. While in Dual Watch
mode, the unit will monitor both the currently selected channel and a second Dual Watch channel.
To Set the Dual Watch Mode
1. Use the
or keys to select the ‘current’ channel.
2. Press and hold the MENU key until the radio beeps.
3. Press the MENU key repeatedly until ‘du’ is displayed. The
icon will be flashing.
4. Press the
or keys to select the second ‘Dual Watch’ channel or select ‘oF’ to disable the
Dual Watch mode.
5. Press the PTT to confirm and store your selection.
While Dual Watch is active, the
icon is displayed and the LCD will alternate between the
selected channel and the Dual Watch channel.
Dual Watch Operation
• If a signal is received on either channel, the radio will pause on that channel for as long as it
remains busy, then resume the Dual Watch 5 seconds after the last transmission has ceased.
• To talk on the Dual Watch channel, press the PTT while the radio is paused on that channel
then talk in the usual way.
• To talk on the selected channel, press the PTT switch while no signals are being received. The
radio will switch to the selected channel. When you have finished your conversation the radio
will resume the Dual Watch 5 seconds after the last transmission has ceased.
To stop the Dual Watch, briefly press the SCAN key. This is equivalent to selecting ‘oF’ in the
Dual Watch menu setting.