3
D1030 - SIL 2 Switch / Proximity Detector Repeater Relay Output G.M. International ISM0008-17
Model: D1030
1 channel S
Power Bus enclosure
2 channels
D
/B
Ordering information
Front Panel and Features
SIL 2 according to to IEC 61508:2010 (Route 2H) with Tproof = 5 / 10 years (10% / >10 % of total SIF).
SC2: Systematic Capability SIL2.
Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
NO/NC contact/proximity Detector Input.
Two SPDT Relay Output Signals.
SPDT Relay Output for fault detection on single channel version.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.
In-field programmability by DIP Switch.
ATEX, IECEx, UL & C-UL, FM & FM-C, INMETRO, EAC-EX, UKR TR n. 898, TÜV Certifications.
Type Approval Certificate DNV and KR for maritime applications.
High Reliability, SMD components.
High Density, two channels per unit.
Simplified installation using standard DIN Rail and plug-in terminal blocks.
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.
Power Bus and DIN-Rail accessories:
DIN rail anchor MCHP065 DIN rail stopper MORT016
Terminal block male MORT017 Terminal block female MORT022
D1030
1 2 3 4
16 15 14 13
5 6 7 8
PWR ON
STATUS/
FAULT
1 2
To Next Page
Loading...