GMP 32800 - Safety Decals; Before Operating the Machine; Introduction

Page 2
GeneralMachineProducts(KT),LLC
Introduction
To operate the power pack efficiently and safely you must know the power pack and
have the skill to use it. If you are a new operator, you should become trained in the
skills of using a power pack before trying to work with it.
It is assumed that personnel carrying out maintenance have at least a sound knowledge
of workshop practice, safety procedures and general techniques associated with the re-
pair of hydraulic equipment.
It is expected that components will be thoroughly cleaned and lubricated, where appro-
priate, also that any opened hose connections will be blanked to prevent entry of dirt
and excessive loss of hydraulic fluid.
Serial numbers are stamped on a plate attached to the top of the unit.
It is important to quote the serial number when making repairs or ordering parts.
Safety Decals
Keep all decals clean and readable. Replace lost or damaged decals.
WARNING
Always use the fold down handles provided, when maneuvering the power pack.
Power packs are heavy pieces of equipment. Always adopt safe lifting practices
otherwise injury may occur.
Before Operating the Machine
 Check for Cleanliness
 Check for Damage
 Check for Leaks
 Make sure the fuel filler cap is tightly closed
 Check Hydraulic Oil Level
 Ensure the machine is positioned safely
 Ensure that all hydraulic couplings are fully serviceable.
 Ensure that any hydraulic tools you are planning to use are compatible with the mod-
el of the machine you are using.
 Check Engine Oil Level
 Check the Fuel
Never refuel with the engine running.
!
!