GMP 32800 - Service Schedules; Daily Maintenance; Every 50 Hours or 3 Months

Page 4
GeneralMachineProducts(KT),LLC
Service Schedules
Apart from the daily jobs, the schedules are based on machine running hours. Keep a
regular check of hours in use. Do not use a machine which is due for a regular service.
Rectify any defects found during regular maintenance before clearing the machine for
use. 

WARNING
Maintenance must be done only by suitably qualified and competent persons. Before
doing any maintenance, make sure the machine is safe and correctly situated on level
ground.
Daily
 Clean machine generally. Clean the machine using water and/or steam. Do not al-
low mud to build up on tire engine. Make sure that the air inlets on the hydraulic
cooler are not clogged.
Check
 Generally for damage
 Hydraulic fluid level
 Engine oil level
 Hydraulic couplings
 Hydraulic hoses
Note: Check tightness of nuts, bolts, screws and hose fittings after the first days opera-
tion and thereafter in accordance with Service Schedules.
Note: The engine oil should be replaced after the first three days operation and thereaf-
ter in accordance with the Maintenance Schedules
Every 50 hours or 3 Months
Do the Daily jobs plus:
Clean
 Air cleaner elements.
(See Engine Manufacturer's Handbook)
 Engine oil filter
Change
 Engine oil
 Hydraulic filter
 Hydraulic oil
!