Need help?Do you have a question about the GMP EXCELAM-1100SWING and is the answer not in the manual?
Details the function and operation of the emergency stop button.
Identifies the physical location of the emergency switch on the machine.
Explains warning sticker related to roller hazards like crushing and burns.
Highlights warnings related to electrical shock and hazards.
Explains the warning sticker for extremely high temperature surfaces.
Lists all the items included in the product packaging.
Diagram labeling the main parts of the laminator.
Instructions for safely moving and handling the product.
Explains how to use and lock the machine's casters.
Introduces the control panel layout and its display windows (Temp, Speed, Job).
Explains the operation of key function buttons like MEMORY, JOB, MEASURE, and COOLING.
Describes the function of the main power switch for operating the machine.
Explains how to adjust film tension using the control handle.
Information on the roller safety cover to prevent burns.
How to use the side slitter for trimming film margins.
Steps for installing the film for hot laminating.
Detailed procedure for loading film onto the laminator.
Diagram illustrating the film path during hot laminating.
Steps to prepare the machine and film for the lamination process.
Steps involved in the actual hot laminating process.
Introduction to using Micronex film for ultra-thin overlay coating.
Steps for installing Micronex film.
Introduction to the cold laminating process.
Steps for installing film for cold lamination.
Diagram showing the film loading process for cold lamination.
Details on the actual cold laminating process.
Guide to recommended temperature and speed settings for lamination.
Instructions for cleaning the laminating rollers.
Solutions for when the machine does not power on.
Steps to resolve issues with the roller not operating.
Solutions for problems related to the rewinder.
How to fix material curling upwards after lamination.
Solutions for a specific lamination issue identified as Symptom A.
Solutions for a specific lamination issue identified as Symptom C.
Detailed technical specifications for the EXCELAM models.
Contact details and addresses for GMP subsidiaries.
To Next Page
General
