Need help?Do you have a question about the GMP QTOPIC-380 and is the answer not in the manual?
General| Max. Laminating Width | 380 mm |
|---|---|
| Max. Laminating Speed | 3 m/min |
| Temperature Control | Yes |
| Power Supply | 220-240V, 50/60Hz |
| Warm-up Time | 5 minutes |
Defines warning and caution symbols used in the manual.
Lists critical safety warnings related to the machine's power supply and electrical connections.
Provides important safety cautions for the proper installation of the machine.
Details the function and operation of the emergency stop switch for immediate system shutdown.
Identifies various warning stickers on the machine, covering electrical, chain, and roller hazards.
Step-by-step guide for safely unpacking and relocating the machine.
Specifies installation site requirements and safe power connection procedures.
Explains the LCD display, master dial, and basic setting buttons like TEMP and PAPER LENGTH.
Covers initial setup, control panel configuration, and loading the laminating film.
Details the lamination process, including test lamination and handling feeding errors.
Provides instructions for cleaning the machine's rollers and main body to ensure proper function.
Lists common problems related to paper feeding and their solutions.
Addresses common problems encountered during the lamination process and their remedies.
To Next Page
