Need help?Do you have a question about the GMP EXCELMASTER-1600 and is the answer not in the manual?
Covers entanglement, heat, sharp blades, and general operational warnings for user safety.
Focuses on proper power connection, grounding, and electrical hazard avoidance.
Advises against user servicing and emphasizes qualified personnel for repairs.
Ensures adequate doorways, room for operation, and a clean environment.
Recommends hiring a certified electrician for proper power supply.
Steps for connecting the unit to a suitable grounded electrical outlet.
Explains the POWER ON/OFF switch and the control panel display.
Functionality for selecting job numbers and adjusting operating speed.
Details the Master Dial and temperature/speed setting controls.
Covers E-STOP buttons, interlock latch, and safety shield functions.
Selecting job modes, speed, temperatures, and roller gaps.
Pressing buttons to close rollers and align/push material.
Troubleshooting steps for resolving film obstructions.
Procedure for cleaning adhesive deposits from heat rollers.
Safety precautions to follow during cleaning, especially with hot rollers.
Addresses problems with the control panel not illuminating or buttons not working.
Solutions for rollers not turning or film jams.
Diagnoses issues like curling, poor adhesion, and output waves.
To Next Page
General
