Gnet GI700 - Basic Functionality and Operation; General Device Operations

7. HOW TO USE
·HOW TO USE
10
G-Net system DASH CAM
Power On
Power Off
External GPS Unit
WIFI Registration
- All LED lights will lit when starting up your vehicle.
- Recording starts with the voice guidance, "Start recording." Only red recording LED will lit.
- Blue GPS LED will lit only if cam is connected with GPS unit.
- Press the power button on the side, 'power off' button on the LCD screen or plug out the
power cable.
- After pressing the WIFI button on the LCD screen, voice guidance "Standby mode for registration"
will be heard.
- Standby mode for registration will be released if no connection is made within two minutes.
- If connected with the GPS unit, the blue GPS LED will blink and lit.
- Inspect the connection if the GPS LED does not lit even if cam is connected with the GPS Unit