EasyManua.ls Logo

GNS 3000 - Operation and Functionality; Safety Precautions and Notices

GNS 3000
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Dear Customer,
thank you for purchasing the
GNS 3000.
Please read the
following information carefully to ensure problem-free and
optimal functionality.
The
GNS 3000
is a GPS/GALILEO/GLONASS receiver with
Bluetooth technology. The powerful 99-channel GNSS receiver
allows simultaneous reception of GPS, GALILEO and GLONASS
signals. The
GNS 3000
supports the SBAS System for accuracy
improvement, all worldwide standards (WAAS, EGNOS, QZSS,
MSAS, GAGAN) are supported. Due to its state of the art GNSS
and Bluetooth technology the GNS 3000 supports almost all
recent and older Apple products as well as Android devices
and other handhelds (smartphones, PDAs, Notebooks) with
highly accurate position information.
Note: The
GNS 3000
is not a USB device, the USB port can
only be used for charging the battery. Data transfer over
USB port is not possible.
Safety notices
Do not manually operate your GPS navigation system while
driving.
Protect the
GNS 3000
from moisture; observe the limits on
operating and storage temperatures.
This device contains a Li-Ion battery and should only be
operated at temperatures between 0° and +50°C (32 and
122°F). Do not expose the
GNS 3000
to direct sunlight or
heat.
Do not open or modify. Failure to comply will result in the
guarantee and warranty becoming void. There are no
components inside that can be serviced by the user.
Only connect the
GNS 3000
to the devices and connector
types described in this instructions manual.
Be sure to respect the laws of the country you are in with
respect to operation of devices whilst driving.
Do not operate the
GNS 3000
with a damaged charger cable
or if the unit has been dropped or damaged.

Related product manuals