EasyManua.ls Logo

Go-Float Fusion - Troubleshooting and Safety; Common Issues and Solutions; Boating Safety Recommendations

Go-Float Fusion
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
Symptom Possible Cause/Solution
Speed loss
1. Check for weeds or fishing line on
the propeller and remove.
2. Check battery charge status.
3. Check battery connections.
Motor noise or vibration
1. Check propeller for weeds or
fishing line.
2. Check to see propeller is secure
and not damaged.
Weeds on prop
Weeds on Beach Buddy
TM
Weed Removal while Underway:
1. Set the speed control at Forward 5
and spin the propeller briefly.
2. Stop the motor, set the speed at
Reverse 2 and spin the propeller
briefly.
3. Reset the speed to forward and
check for improved performance.
4. Repeat steps 1-3 until weeds are
cleared and satisfactory
performance has returned.
Weeds on prop
Weeds on Beach Buddy
TM
Weed Removal Manually:
CAUTION! TURN MOTOR OFF before
attempting to remove weeds by hand.
Personal Flotation Device. We recommend that a proper personal
flotation device be worn by all occupants of the boat.
Motor and Prop. Always watch for other boaters or hazards while on
the water. This boat is not designed to be a swimming or diving
platform. Watch out for swimmers near your boat.
Spinning props can cause serious injury or death.
Motor. Do not run the motor out of the water. The motor needs to be
submerged in water to stay cool. Running the motor when dry can
seriously damage motor’s seals.
Go-Float Electric Boats can not be responsible for accidents due to
misuse, modifications or for using the boat in any manner other than its
intended use.
Boating Safety

Related product manuals