Go Power 10 AMP RVC-MPPT User Manual

[page 12] | gpelectric.com
ITEM PARAMETERS
Battery Voltage Range 8V – 16V
Max Charge Current 10A
Conversion E󰀩ciency ≤98%
MPPT Tracking E󰀩ciency >99%
Max Panel Input Voltage 100Voc
Max PV Power Input 200W
No-Load Loss <10mA
Grounding Negative
Operating Temperature -35 to 45°C
Storage Temperature -35 to 75°C
Humidity 95% N.C.
Battery Type Lead Acid (AGM, GEL, Flooded), LiFePO4
Max Wire Gauge 8 AWG
Dimensions (H x W x D) 3.35” x 6.1” x 1.57”
Weight 0.67lbs (300g)
Water Ingress Protection IP32
Altitude < 3000m
Protection Solar/battery reverse polarity
Solar/battery over voltage
Solar/battery short circuit
Over temperature
7. SPECIFICATIONS

Go Power 10 AMP RVC-MPPT Specifications

General

Battery Voltage Range	8V – 16V
Battery Type	Lead Acid (AGM, GEL, Flooded), LiFePO4
Max Charge Current	10A
Max Panel Input Voltage	100Voc
Max PV Power Input	200W
Conversion Efficiency	≤98%
MPPT Tracking Efficiency	>99%
No-Load Loss	<10mA
Grounding	Negative
Max Wire Gauge	8 AWG
Operating Temperature	-35 to 45°C
Storage Temperature	-35 to 75°C
Humidity	95% N.C.
Water Ingress Protection	IP32
Altitude	< 3000m
Protection	Solar/battery reverse polarity Solar/battery over voltage Solar/battery short circuit Over temperature

Weight and Dimensions

Dimensions (H x W x D)	3.35” x 6.1” x 1.57”
Weight	0.67lbs (300g)