To Next PageTo Next Page
Need help?Do you have a question about the Go Power GP-PWM-10 and is the answer not in the manual?
General| Brand | Go Power |
|---|---|
| Model | GP-PWM-10 |
| Category | Controller |
| Language | English |
Overview of the solar controller's function and technology.
Technical details including voltage, current, dimensions, and protection features.
Safety warning to disconnect power before installation.
Precautions for handling batteries and wiring safely.
Guidance on ensuring secure and correct wiring connections.
General safety advice for working with electricity and batteries.
Instructions on connecting terminals correctly to avoid damage.
Warning regarding system current and voltage limits.
Recommended mounting positions and environmental protection for the unit.
Advice on choosing appropriate wire type and gauge for connections.
Step-by-step instructions for connecting the controller to battery and solar array.
Instructions for physically mounting the unit and retorquing screws.
Initial power-on sequence and self-test procedures.
Procedure to select the correct battery type for optimal charging.
Explanation of LED indicators and LCD display messages.
Diagnosing and resolving issues related to the controller's display.
Troubleshooting inaccurate voltage readings.
Diagnosing low or zero current readings.
Troubleshooting current readings lower than expected.
Instructions for warranty claims and returning defective products.
