Go Power GP-PWM-30-SQ User Manual

GP-PWM-30-SQ
1
Owner’s Manual
Contents
1.0 Installation Overview.......................................................................................................................... 2
2.0 Warnings
..............................................................................................................................................
3
3.0 Choosing a Location..........................................................................................................................4
4.0 Installation Instructions......................................................................................................................4
5.0 Operating Instructions
.......................................................................................................................
5
6.0 Frequently Asked Questions (FAQs)..............................................................................................7
7.0 Troubleshooting..................................................................................................................................7
8.0 General Warranty
...............................................................................................................................
8
9.0 Wiring Diagram................................................................................................................................... 9
GP-PWM-30-SQ
10.0 Installation Template...........................................................................................................................9

Go Power GP-PWM-30-SQ Specifications

General

Type	PWM
Rated Current	30A
Max. Solar Input Current	30A
Max. Output Current	30A
Input Voltage	12/24VDC (auto-detect)
Max. Solar Input Voltage	50V
Max. Solar Input Power	400W (12V) / 800W (24V)
Output Voltage	12V
Battery Type	Lithium
Temperature Compensation	-3mV/°C/cell
Protection Features	Reverse polarity, overcharge, short circuit, over temperature, Overload

Summary

Installation Overview

1.1 Introduction

Overview of the solar controller's purpose and technology.

1.2 Specifications

Detailed technical specifications of the solar charge controller.

Warnings

General Safety Warnings

Crucial safety precautions for installation and operation, including electrical hazards and battery handling.

Choosing a Location

Installation Instructions

Operating Instructions

5.1 Power Up

Procedure for powering up the controller and initial checks.

5.2 Setting the Battery Type / Charging Profile

Instructions for selecting the correct battery type for optimal charging.

Troubleshooting

7.1 Problems with the Display

Diagnosing and resolving issues related to the controller's display screen.

7.2 Problems with Voltage

Troubleshooting inaccurate voltage readings and potential causes.

7.3 Problems with Current

Addressing issues with current readings, including zero or low current.

7.4 Problems with Current 2

Further troubleshooting steps for current readings and potential causes.

General Warranty

8.1 Return Information

Procedure for returning the product for service or replacement.

Wiring Diagram

Installation Template