Gocycle
®
Owner’s Manual for GS, August 2018
© Karbon Kinetics Limited. All Rights Reserved. 29
5.3.2 Battery Operation Mode (Wakes the Battery for Use)
The battery must be in Operation Mode before you can use your Gocycle. If the battery is not in
Operation Mode, the Gocycle GS motor and Bluetooth to connect to your smart phone will not
function.
To wake the battery for use:
Press the button until the LEDs begin to
flash
The two left LEDs (1,2) will begin to flash
while the battery is waking up.
After the LEDs turn off you can check your
fuel level by momentarily pressing the
button.
5.3.3 Returning the Battery to Sleep Mode
If no activity is detected by the Gocycle, the battery will enter sleep mode after approximately 5
hours.
To Next Page
Loading...
