Gocycle GS - Page 54

Gocycle
®
Owner’s Manual for GS, August 2018
© Karbon Kinetics Limited. All Rights Reserved. 53
Keep 2 cam levers in the
closed position and open
one cam lever fully so that
the back edge touches the
next closed cam lever.
Lightly move the cam lever
back and forth to gauge the
extent of the free play.
Free play is defined as the
portion of movement where
there is no noticeable
pressure required to move
the cam lever before it
engages with the hub. It is
measured at the tip of the
cam lever.
If the free play exceeds 10-
20mm at the tip of the cam
lever, use the 4mm Allen
key to reduce this.
10-
20
mm