What to do if Godex EZ-1100Plus label couldn’t feed or abnormal cutting occurs when using cutter?
If the label couldn’t feed or abnormal cutting occurs when using the cutter on your Godex Barcode Reader, check if the cutter is installed properly. Also, check if the Paper Feed Rods are sticky.
What to do if Godex EZ-1100Plus Barcode Reader abnormal function occurs when using stripper?
If an abnormal function occurs when using the stripper on your Godex Barcode Reader, check if the stripper sensor is covered with dust. Also, check if the label is installed properly.
How to fix Godex EZ-1100Plus Barcode Reader if the LED does not light up?
If the LED does not light up when you power on your Godex Barcode Reader, check the power connector.
Essential safety precautions for operating and maintaining the printer, covering humidity, power, liquid spills, and servicing.
Lists all items included in the printer package for setup and use.
Details technical specifications like print method, resolution, speed, width, length, memory, sensors, and media.
Describes parallel, serial (RS232), and USB interfaces for connecting the printer.
Identifies external and internal components of the printer through diagrams and labels.
Step-by-step guide for correctly installing a ribbon for thermal transfer printing.
Instructions for loading and preparing label rolls for printing.
Detailed instructions for installing different sizes of label roll cores.
Specific instructions for installing card or hang tag media using the sensor.
Steps to connect the printer to a computer via USB or parallel port.
Guide for installing the necessary printer drivers on a Windows system.
Instructions for installing the optional label stripping module.
Instructions for installing the optional automatic cutting module.
Guide for installing the optional Ethernet network module.
Guide for installing the optional WLAN wireless network module.
Instructions for installing the CF card adapter for memory expansion.
Details on using and formatting CF cards for printer memory.
Explains the operation and use of the FEED key for media advancement.
Describes the meaning of different LED light states for printer status.
Guides on performing auto-sensing to calibrate label detection.
Explains the content and purpose of the self-test page for diagnostics.
Lists common error messages and their corresponding solutions.
Procedures for cleaning the thermal print head to ensure print quality.
How to adjust print head pressure for balanced print quality.
Adjusting the print head gear for better alignment and quality.
Instructions on how to adjust the cutter mechanism, especially after a jam.
A comprehensive list of common problems and recommended solutions.
Details on regulatory compliance, certifications (CE, FCC, UL, etc.), and test reports.
General| Print Resolution | 203 dpi |
|---|---|
| Print Method | Thermal Transfer / Direct Thermal |
| Processor | 32-bit RISC |
| Interfaces | USB, Serial (RS-232) |
| Supported Barcode Types | 1D: Code 39, Code 128, Interleaved 2 of 5, UPC-A, UPC-E, EAN-8, EAN-13 2D: PDF417, Data Matrix, QR Code |
| Supported Media Types | tag |
| Label Core Diameter | 1" (25.4 mm), 1.5" (38.1 mm) |
| Power Supply | AC 100-240V, 50/60Hz |
| Operating Temperature | 41 to 104°F (5 to 40°C) |
| Storage Humidity | 10 to 90% (non-condensing) |
| Max Print Speed | 4 ips (101.6 mm/s) |
| Operating Humidity | 30-85%, non-condensing |
To Next Page
