Need help?Do you have a question about the Godex G530 and is the answer not in the manual?
Lists all items included with the printer for initial setup verification.
Provides an overview of the printer's physical components, views, and ports.
Step-by-step guide to opening the printer cover for access to internal components.
Instructions on releasing and lifting the printer's printing mechanism.
Detailed procedure for installing a new ribbon module onto the printer's supply and rewind hubs.
Steps for placing label stock onto the supply hub and loading it into the printer.
Guide for installing the label supply hub, specifying different core sizes (1", 1.5", 3").
Instructions for positioning the sensor for correct tag printing functionality.
Instructions for connecting the printer to a computer via power and data cables.
Step-by-step process for installing the printer driver from the product CD.
Explains the FEED button, LED indicators, and beep signals for printer status.
Procedure for calibrating label size and performing a self-test to verify printer function.
Details common printer error messages, their causes, and suggested solutions.
Guide to installing the NetSetting software for managing network configurations.
An overview of the NetSetting software's graphical interface for printer management.
Configuring printer name, port, gateway, and IP address settings via the software.
Setting up notification channels (SMTP/SNMP) for printer error alerts.
Customizing which printer errors trigger notifications and how they are sent.
Adjusting key printer operational settings like resolution, speed, and darkness through software.
Provides an interface to send commands to the printer for remote control.
Instructions for updating the printer's firmware remotely using the NetSetting software.
General preparation steps required before installing optional printer accessories.
Overview and steps for installing the label dispenser accessory.
Overview and steps for installing the cutter accessory, including preparation.
Detailed instructions for cleaning the printer's print head to ensure optimal print quality.
How to adjust print head pressure for better print quality on various media types.
Procedure for adjusting the print line position to ensure correct alignment with the paper feed roller.
Steps for clearing paper jams and adjusting the cutter module for proper function.
A comprehensive guide to diagnosing and resolving common printer problems and error messages.
Lists all items included with the printer for initial setup verification.
Provides an overview of the printer's physical components, views, and ports.
Step-by-step guide to opening the printer cover for access to internal components.
Instructions on releasing and lifting the printer's printing mechanism.
Detailed procedure for installing a new ribbon module onto the printer's supply and rewind hubs.
Steps for placing label stock onto the supply hub and loading it into the printer.
Guide for installing the label supply hub, specifying different core sizes (1", 1.5", 3").
Instructions for positioning the sensor for correct tag printing functionality.
Instructions for connecting the printer to a computer via power and data cables.
Step-by-step process for installing the printer driver from the product CD.
Explains the FEED button, LED indicators, and beep signals for printer status.
Procedure for calibrating label size and performing a self-test to verify printer function.
Details common printer error messages, their causes, and suggested solutions.
Guide to installing the NetSetting software for managing network configurations.
An overview of the NetSetting software's graphical interface for printer management.
Configuring printer name, port, gateway, and IP address settings via the software.
Setting up notification channels (SMTP/SNMP) for printer error alerts.
Customizing which printer errors trigger notifications and how they are sent.
Adjusting key printer operational settings like resolution, speed, and darkness through software.
Provides an interface to send commands to the printer for remote control.
Instructions for updating the printer's firmware remotely using the NetSetting software.
General preparation steps required before installing optional printer accessories.
Overview and steps for installing the label dispenser accessory.
Overview and steps for installing the cutter accessory, including preparation.
Detailed instructions for cleaning the printer's print head to ensure optimal print quality.
How to adjust print head pressure for better print quality on various media types.
Procedure for adjusting the print line position to ensure correct alignment with the paper feed roller.
Steps for clearing paper jams and adjusting the cutter module for proper function.
A comprehensive guide to diagnosing and resolving common printer problems and error messages.
General| Color | - |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 762 mm |
| Maximum printing width | 105.7 mm |
| Display | LCD |
| Product color | Black |
| Ethernet LAN | Yes |
| Connectivity technology | Wired |
| Parallel ports quantity | 1 |
| Flash memory | 8 MB |
| Certification | CE(EMC), FCC Class A, CB, cUL, CCC |
| Internal memory | 16 MB |
| Windows code pages supported | 1250, 1251, 1252, 1253, 1254, 1255, 1257 Unicode (UTF8, UTF16) |
| Ribbon width | 110 mm |
| Core diameter | 76.2 mm |
| Ribbon length | 300 m |
| Media thickness | 0.25 mm |
| Maximum label width | 118 mm |
| Maximum roll diameter | 127 mm |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | 10 - 90 °C |
| Operating temperature (T-T) | 30 - 85 °C |
| Storage relative humidity (H-H) | -20 - 50 % |
| Operating relative humidity (H-H) | 5 - 40 % |
Weight and Dimensions| Depth | 285 mm |
|---|---|
| Width | 226 mm |
| Height | 171 mm |
| Weight | 2720 g |
To Next Page
