Need help?Do you have a question about the Godex GS550 and is the answer not in the manual?
Steps for connecting the scanner using a USB port.
Steps for connecting the scanner using a keyboard wedge interface.
Guidance on how to aim and position the scanner for optimal bar code reads.
Instructions to revert all scanner settings to their original factory state.
Using pre-defined bar codes for quick scanner setup with common interfaces.
Programming the scanner for IBM PC AT and compatible keyboard wedge interfaces.
Setting up the scanner for direct connection with laptop keyboards.
Configuration for USB IBM SurePos, PC/Mac Keyboard, and HID interfaces.
Configuring the minimum time before the scanner can read another bar code.
Enabling automatic scanning using ambient light detection.
Adjusting scanner sensitivity to bar code presentation.
Defining a centering window to ensure reads of intended bar codes.
Adjusting the scanner's field of view for precise bar code reading.
Understanding how prefixes and suffixes build message strings for scanned data.
Setting delays between transmitted characters to prevent data loss.
Step-by-step guide to creating and saving new data formats.
Commands for manipulating data output and sending characters.
Commands for cursor movement within the data output.
Commands for searching characters within the data.
Commands for suppressing, replacing, and comparing characters.
Enabling or disabling the data formatter and its requirements.
Enabling or disabling the decoding of all supported bar code symbologies.
Configuring Codabar options like On/Off, start/stop, and check characters.
Configuring Code 39 options like On/Off, start/stop, and check characters.
Configuring Interleaved 2 of 5 options like On/Off and check digits.
Configuring NEC 2 of 5 options like On/Off and check digits.
Configuring Code 93 options like On/Off and message length.
Configuring Straight 2 of 5 Industrial options like On/Off and message length.
Detailed technical specifications including mechanical, electrical, and performance data.
Information regarding authorized service centers for repairs and upgrades.
Guide to diagnosing and resolving common scanner operational problems.
Contact information for technical support, product service, and repair.
Details on Godex's product warranty, coverage, and limitations.
A reference table of symbologies with AIM IDs, modifiers, and hex codes.
Steps for connecting the scanner using a USB port.
Steps for connecting the scanner using a keyboard wedge interface.
Guidance on how to aim and position the scanner for optimal bar code reads.
Instructions to revert all scanner settings to their original factory state.
Using pre-defined bar codes for quick scanner setup with common interfaces.
Programming the scanner for IBM PC AT and compatible keyboard wedge interfaces.
Setting up the scanner for direct connection with laptop keyboards.
Configuration for USB IBM SurePos, PC/Mac Keyboard, and HID interfaces.
Configuring the minimum time before the scanner can read another bar code.
Enabling automatic scanning using ambient light detection.
Adjusting scanner sensitivity to bar code presentation.
Defining a centering window to ensure reads of intended bar codes.
Adjusting the scanner's field of view for precise bar code reading.
Understanding how prefixes and suffixes build message strings for scanned data.
Setting delays between transmitted characters to prevent data loss.
Step-by-step guide to creating and saving new data formats.
Commands for manipulating data output and sending characters.
Commands for cursor movement within the data output.
Commands for searching characters within the data.
Commands for suppressing, replacing, and comparing characters.
Enabling or disabling the data formatter and its requirements.
Enabling or disabling the decoding of all supported bar code symbologies.
Configuring Codabar options like On/Off, start/stop, and check characters.
Configuring Code 39 options like On/Off, start/stop, and check characters.
Configuring Interleaved 2 of 5 options like On/Off and check digits.
Configuring NEC 2 of 5 options like On/Off and check digits.
Configuring Code 93 options like On/Off and message length.
Configuring Straight 2 of 5 Industrial options like On/Off and message length.
Detailed technical specifications including mechanical, electrical, and performance data.
Information regarding authorized service centers for repairs and upgrades.
Guide to diagnosing and resolving common scanner operational problems.
Contact information for technical support, product service, and repair.
Details on Godex's product warranty, coverage, and limitations.
A reference table of symbologies with AIM IDs, modifiers, and hex codes.
General| Brand | Godex |
|---|---|
| Model | GS550 |
| Category | Barcode Reader |
| Language | English |
To Next Page
