Need help?Do you have a question about the Godex ZX1300i and is the answer not in the manual?
FCC limits for Class A devices, potential interference.
General safety guidelines for printer operation.
Lists all items included in the printer package.
Identifies components on the front and rear of the printer.
Illustrates and labels the internal parts of the printer.
Steps for loading label rolls and ribbons.
Connects the printer to a computer via USB and power.
Installs printer driver and GoLabel software from CD.
Describes printer buttons and basic LCD navigation.
Explains LCD screen menus, status, and icons.
Procedures for calibrating labels and running self-tests.
Lists errors, causes, and solutions for printer issues.
Uses of USB host for memory sticks, keyboards, and scanners.
Installs NetSetting for network configuration.
Covers NetSetting interface, IP settings, and alerts.
Configures SMTP and SNMP for alert messages.
Settings and commands via NetSetting.
Process for downloading and updating printer firmware.
Steps for installing optional modules like cutters.
Installing/removing and cleaning the print head module.
Adjusting print quality and pressure.
Adjusting ribbon tension and shield screws.
Procedure for cleaning the print head.
Cutter settings and clearing paper jams.
Detailed technical specs for ZX1200i, ZX1300i, ZX1600i.
Pinout configurations for parallel, serial, USB, and Ethernet ports.
Wiring diagram for the applicator interface.
Visual guide for installing parallel or applicator modules.
Instructions to enable LPT port via GoConfig utility.
Detailed steps for installing the label dispenser and liner rewind module.
Step-by-step guide for installing the Bluetooth module.
Steps to install the Wi-Fi module.
Guides for setting up Wi-Fi, AP, and Wi-Fi tool.
Instructions for configuring a D-Link access point.
Using Wi-Fi Tool for connection setup.
Steps for operating the liner rewind function.
Instructions for removing the liner roll.
FCC limits for Class A devices, potential interference.
General safety guidelines for printer operation.
Lists all items included in the printer package.
Identifies components on the front and rear of the printer.
Illustrates and labels the internal parts of the printer.
Steps for loading label rolls and ribbons.
Connects the printer to a computer via USB and power.
Installs printer driver and GoLabel software from CD.
Describes printer buttons and basic LCD navigation.
Explains LCD screen menus, status, and icons.
Procedures for calibrating labels and running self-tests.
Lists errors, causes, and solutions for printer issues.
Uses of USB host for memory sticks, keyboards, and scanners.
Installs NetSetting for network configuration.
Covers NetSetting interface, IP settings, and alerts.
Configures SMTP and SNMP for alert messages.
Settings and commands via NetSetting.
Process for downloading and updating printer firmware.
Steps for installing optional modules like cutters.
Installing/removing and cleaning the print head module.
Adjusting print quality and pressure.
Adjusting ribbon tension and shield screws.
Procedure for cleaning the print head.
Cutter settings and clearing paper jams.
Detailed technical specs for ZX1200i, ZX1300i, ZX1600i.
Pinout configurations for parallel, serial, USB, and Ethernet ports.
Wiring diagram for the applicator interface.
Visual guide for installing parallel or applicator modules.
Instructions to enable LPT port via GoConfig utility.
Detailed steps for installing the label dispenser and liner rewind module.
Step-by-step guide for installing the Bluetooth module.
Steps to install the Wi-Fi module.
Guides for setting up Wi-Fi, AP, and Wi-Fi tool.
Instructions for configuring a D-Link access point.
Using Wi-Fi Tool for connection setup.
Steps for operating the liner rewind function.
Instructions for removing the liner roll.
General| Color | - |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 300 x 300 DPI |
| Maximum print height | 2159 mm |
| Maximum printing width | 105.7 mm |
| Display | LCD |
| Control type | Touch |
| Product color | Black |
| Backlight color | Green |
| Backlight display | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Optional connectivity | Bluetooth |
| USB 2.0 ports quantity | 3 |
| Flash memory | 128 MB |
| Internal memory | 32 MB |
| Built-in barcodes | 1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Data Matrix, EAN128, EAN13, EAN8, ITF, ITF-14, Industrial 2/5, Interleaved 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E |
| Ribbon width | 70 mm |
| Core diameter | 57.5 mm |
| Ribbon length | 450 m |
| Media thickness | 0.06 - 0.25 mm |
| Maximum label width | 118 mm |
| Maximum roll diameter | 203.2 mm |
| Mobile operating systems supported | Android, Windows Mobile |
| Windows operating systems supported | Windows 7 Home Basic, Windows 8, Windows 8.1, Windows Vista Home Basic, Windows XP Home |
| LED indicators | Ready |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 465 mm |
|---|---|
| Width | 270.71 mm |
| Height | 308.2 mm |
| Weight | 13600 g |
To Next Page
