Need help?Do you have a question about the Godex ZX1200i and is the answer not in the manual?
Lists all items included with the printer for user verification.
Details the printer's front, rear, and internal views with component labels.
Instructions and diagrams for loading the label roll into the printer.
Guide on how to load and remove the ribbon, considering ink side orientation.
Step-by-step instructions for connecting the printer to a computer via USB.
Guide to installing the printer driver and GoLabel software using the provided CD.
Explains the function of the printer's physical buttons: POWER, FEED, PAUSE/CANCEL.
Introduces the printer's LCD screen, touch gestures, and basic navigation.
Details the various functions accessible via the LCD, including Main, Wizard, and Test modes.
Explains how to perform label calibration and run a self-test.
Details printer error types, beeps, descriptions, and solutions.
Explains the use of the USB Host port for memory sticks, keyboards, and scanners.
Steps to install the NetSetting software for Ethernet configuration.
Overview of the NetSetting interface for searching and connecting printers.
Pre-installation steps for optional modules, including turning off the printer.
Detailed steps for installing the cutter module onto the printer.
Instructions on how to cut and remove the ribbon from the printer.
Procedure for installing and removing the printer's print head module.
Guide on how to adjust the print line for optimal print quality.
How to adjust the ribbon tension for proper printing.
Instructions for cleaning the thermal print head to ensure print quality.
Steps to adjust print head tension for even ink distribution and print quality.
How to adjust ribbon shield screws to correct ribbon wrinkling and improve print.
Instructions for managing cutter settings, including cleaning and reinstallation.
Common problems, their causes, and solutions for printer operation.
Detailed technical specifications for ZX1200i, ZX1300i, and ZX1600i models.
Pinout and handshaking details for the parallel port interface.
Default settings and pinout for the serial port interface.
Pinout details for USB Type A and Type B connectors.
Pinout details for the Ethernet RJ-45 connector.
Pinout and function details for the applicator interface.
Lists all items included with the printer for user verification.
Details the printer's front, rear, and internal views with component labels.
Instructions and diagrams for loading the label roll into the printer.
Guide on how to load and remove the ribbon, considering ink side orientation.
Step-by-step instructions for connecting the printer to a computer via USB.
Guide to installing the printer driver and GoLabel software using the provided CD.
Explains the function of the printer's physical buttons: POWER, FEED, PAUSE/CANCEL.
Introduces the printer's LCD screen, touch gestures, and basic navigation.
Details the various functions accessible via the LCD, including Main, Wizard, and Test modes.
Explains how to perform label calibration and run a self-test.
Details printer error types, beeps, descriptions, and solutions.
Explains the use of the USB Host port for memory sticks, keyboards, and scanners.
Steps to install the NetSetting software for Ethernet configuration.
Overview of the NetSetting interface for searching and connecting printers.
Pre-installation steps for optional modules, including turning off the printer.
Detailed steps for installing the cutter module onto the printer.
Instructions on how to cut and remove the ribbon from the printer.
Procedure for installing and removing the printer's print head module.
Guide on how to adjust the print line for optimal print quality.
How to adjust the ribbon tension for proper printing.
Instructions for cleaning the thermal print head to ensure print quality.
Steps to adjust print head tension for even ink distribution and print quality.
How to adjust ribbon shield screws to correct ribbon wrinkling and improve print.
Instructions for managing cutter settings, including cleaning and reinstallation.
Common problems, their causes, and solutions for printer operation.
Detailed technical specifications for ZX1200i, ZX1300i, and ZX1600i models.
Pinout and handshaking details for the parallel port interface.
Default settings and pinout for the serial port interface.
Pinout details for USB Type A and Type B connectors.
Pinout details for the Ethernet RJ-45 connector.
Pinout and function details for the applicator interface.
General| Color | - |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 203 x 203 DPI |
| Maximum print height | 4572 mm |
| Maximum printing width | 108 mm |
| Display | LCD |
| Control type | Touch |
| Product color | Black |
| Backlight color | Green |
| Backlight display | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Optional connectivity | Bluetooth |
| USB 2.0 ports quantity | 3 |
| Flash memory | 128 MB |
| Internal memory | 32 MB |
| Built-in barcodes | 1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Data Matrix, EAN128, EAN13, EAN8, ITF, ITF-14, Industrial 2/5, Interleaved 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E |
| Ribbon width | 70 mm |
| Core diameter | 57.5 mm |
| Ribbon length | 450 m |
| Media thickness | 0.06 - 0.25 mm |
| Maximum label width | 118 mm |
| Maximum roll diameter | 203.2 mm |
| Mobile operating systems supported | Android, Windows Mobile |
| Windows operating systems supported | Windows 7 Home Basic, Windows 8, Windows 8.1, Windows Vista Home Basic, Windows XP Home |
| LED indicators | Ready |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
Weight and Dimensions| Depth | 465 mm |
|---|---|
| Width | 270.71 mm |
| Height | 308.2 mm |
| Weight | 13600 g |
To Next Page
