Need help?Do you have a question about the Godex ZX1600i and is the answer not in the manual?
Statement regarding compliance with FCC rules for digital devices.
Essential safety guidelines for operating and maintaining the printer.
Essential safety guidelines for operating and maintaining the printer.
Important warnings regarding battery, power supply, and modifications.
Introduction to the barcode printer and its components.
List of items included with the barcode printer package.
Identification of printer's external and internal parts.
Identification of front and rear external components of the printer.
Diagram illustrating the internal components and their layout within the printer.
Step-by-step instructions for loading label rolls into the printer.
Explanation of Thermal Transfer and Direct Thermal printing methods.
Instructions for properly loading the label roll into the printer.
Guide on how to install a ribbon based on ink side orientation.
Guide on how to install a ribbon based on ink side orientation.
Steps for physically connecting the printer to a computer.
Steps for physically connecting the printer to a computer via cables.
Procedure for installing printer drivers and GoLabel software.
Procedure for installing printer drivers and GoLabel software from CD.
Choices for downloading new versions or installing from the product disc.
Steps to install printer drivers directly from the CD.
Steps to install printer drivers directly from the CD's driver folder.
Selecting the correct printer model for driver installation.
Configuring connection port and printer name during driver setup.
Configuring the connection port and naming the printer during driver setup.
Confirming the printer appears in the system's printer folder.
Confirming the newly installed printer appears in the system's printer folder.
Understanding the printer's physical buttons and their functions.
Details on turning the printer on/off and advancing media.
Navigating the printer's touchscreen interface.
Initial steps to power on and navigate the printer's LCD interface.
Using touch gestures and stylus for interacting with the LCD screen.
Exploring main menu options and settings.
Overview of the three primary modes: Main, Wizard, and Test.
Modifying settings like Darkness, Speed, and Media Type.
Using lock and unlock features to prevent unintended setting changes.
Using keyboard mode and previewing labels.
Using an external keyboard for printer control and input.
Previewing previously created labels directly on the printer.
Accessing and printing stored labels.
Accessing and selecting stored labels for preview or printing.
Detailed explanation of LCD icons and functions.
Description of icons and their corresponding functions on the main menu.
Configuration options for device-specific settings.
Description of icons and their functions on the device settings menu.
Comprehensive list of configurable items within the setting modes.
Detailed list of configurable items within the printer settings menu.
Settings for display language and character code pages.
Configuration options related to label formatting and positioning.
Various settings for device, printer control, and optional modules.
Configuration for Buzzer, Baud Rate, Serial Port, LAN, LCD, and Clock.
Settings for printer control functions and using the wizard mode.
Options for Bluetooth connectivity and running printer tests.
Understanding printer status and resolving errors via LCD.
Understanding the "Ready" status and error messages displayed on the LCD.
Explanations of navigation and lock/unlock icons on the LCD interface.
Procedures for calibrating labels and performing self-tests.
Automatic detection and storage of label height for optimal printing.
Procedure to perform a self-test to check printer functionality.
Using the hardware button for label calibration.
How to use the hardware button for label calibration.
Comprehensive guide to printer error alerts and their resolutions.
Table detailing printer error types, their causes, and solutions.
Using USB ports for memory sticks, keyboards, scanners, and firmware updates.
Using USB ports for memory sticks, keyboards, and scanners.
Steps for updating the printer's firmware using a USB memory stick.
Operating the printer with USB keyboards and scanners.
Operating the printer with USB keyboards and scanners.
Step-by-step guide to install the NetSetting utility for network configuration.
Step-by-step guide to install the NetSetting utility for network configuration.
Navigating the NetSetting interface for network management.
Initial screen displaying connected printers and basic network information.
Configuring IP address, gateway, and other network settings.
Configuring notification settings for printer alerts.
Setting up SMTP and SNMP for sending alert messages.
Selecting specific error cases for notification.
Choosing specific error cases for notification via SMTP or SNMP.
Remotely configuring printer settings using NetSetting.
Adjusting key printer settings remotely using the NetSetting software.
Sending commands to the printer for remote control.
Using the terminal to send commands for printer control.
Process for updating printer firmware remotely.
Process for downloading and installing firmware updates remotely.
Pre-installation steps for optional printer modules.
Pre-installation preparations for optional modules.
Step-by-step guide to install the cutter module.
Components and initial steps for installing the cutter module.
Removing cover plates and attaching the cutter assembly.
Connecting the cutter's cable and ensuring proper module insertion.
Connecting the cutter's cable and ensuring proper module insertion.
Securing the cutter and loading the label roll.
Securing the cutter and loading the label roll.
Diagram showing the installation process for parallel or applicator modules.
Diagram showing the installation process for parallel or applicator modules.
Steps to enable the printer's LPT port function via software.
Steps to enable the printer's LPT port function via software.
Detailed steps for installing label dispenser and liner rewind modules.
Detailed steps for installing label dispenser and liner rewind modules.
Procedure for installing the optional Bluetooth module.
Procedure for installing the optional Bluetooth module.
Procedure for installing the optional Wi-Fi module.
Procedure for installing the optional Wi-Fi module.
Steps to configure the Wi-Fi module after installation.
Steps to set up the Wi-Fi module after installation.
Guide to configuring a D-Link access point for Wi-Fi connection.
Guide to configuring a D-Link access point for Wi-Fi connection.
Instructions for using the Wi-Fi Tool to configure the printer.
Instructions for using the Wi-Fi Tool to configure the printer.
Ensuring Wi-Fi Tool parameters match the Access Point configuration.
Ensuring Wi-Fi Tool parameters match the Access Point configuration.
Verifying the Wi-Fi connection status and LAN information.
Confirming a successful Wi-Fi connection by checking the status icon.
Verifying related LAN information from the printer's LCD panel.
Establishing a computer-printer connection using Wi-Fi.
Establishing a computer-printer connection using Wi-Fi.
Steps for operating the liner rewind function.
Steps for operating the liner rewind function on the printer.
Procedure for removing the liner roll from the printer.
Procedure for removing the liner roll from the printer.
Procedures for installing and removing the print head module.
Detailed steps for installing and removing the print head module.
Adjusting the print line for optimal print quality.
Procedures for adjusting the print line for optimal print quality.
How to adjust the ribbon tension for proper ribbon feeding.
How to adjust the ribbon tension for proper ribbon feeding.
Instructions for cleaning the thermal print head to maintain print quality.
Instructions for cleaning the thermal print head to maintain print quality.
Adjusting print head pressure for even ink distribution.
Adjusting print head pressure for even ink distribution.
Modifying ribbon shield settings to correct ribbon wrinkling.
Modifying ribbon shield settings to correct ribbon wrinkling.
Procedures for maintaining the cutter assembly.
Procedures for cleaning and maintaining the cutter assembly.
Comprehensive guide to identifying and resolving printer problems.
A comprehensive guide to identifying and resolving printer problems.
Detailed technical specifications for different printer models.
Detailed technical specifications for different printer models.
Pinouts and settings for parallel and serial port connections.
Pinouts and settings for parallel and serial port connections.
Pinout diagrams for USB, Ethernet, and applicator interfaces.
Pinout diagrams for USB, Ethernet, and applicator interfaces.
Statement regarding compliance with FCC rules for digital devices.
Essential safety guidelines for operating and maintaining the printer.
Essential safety guidelines for operating and maintaining the printer.
Important warnings regarding battery, power supply, and modifications.
Introduction to the barcode printer and its components.
List of items included with the barcode printer package.
Identification of printer's external and internal parts.
Identification of front and rear external components of the printer.
Diagram illustrating the internal components and their layout within the printer.
Step-by-step instructions for loading label rolls into the printer.
Explanation of Thermal Transfer and Direct Thermal printing methods.
Instructions for properly loading the label roll into the printer.
Guide on how to install a ribbon based on ink side orientation.
Guide on how to install a ribbon based on ink side orientation.
Steps for physically connecting the printer to a computer.
Steps for physically connecting the printer to a computer via cables.
Procedure for installing printer drivers and GoLabel software.
Procedure for installing printer drivers and GoLabel software from CD.
Choices for downloading new versions or installing from the product disc.
Steps to install printer drivers directly from the CD.
Steps to install printer drivers directly from the CD's driver folder.
Selecting the correct printer model for driver installation.
Configuring connection port and printer name during driver setup.
Configuring the connection port and naming the printer during driver setup.
Confirming the printer appears in the system's printer folder.
Confirming the newly installed printer appears in the system's printer folder.
Understanding the printer's physical buttons and their functions.
Details on turning the printer on/off and advancing media.
Navigating the printer's touchscreen interface.
Initial steps to power on and navigate the printer's LCD interface.
Using touch gestures and stylus for interacting with the LCD screen.
Exploring main menu options and settings.
Overview of the three primary modes: Main, Wizard, and Test.
Modifying settings like Darkness, Speed, and Media Type.
Using lock and unlock features to prevent unintended setting changes.
Using keyboard mode and previewing labels.
Using an external keyboard for printer control and input.
Previewing previously created labels directly on the printer.
Accessing and printing stored labels.
Accessing and selecting stored labels for preview or printing.
Detailed explanation of LCD icons and functions.
Description of icons and their corresponding functions on the main menu.
Configuration options for device-specific settings.
Description of icons and their functions on the device settings menu.
Comprehensive list of configurable items within the setting modes.
Detailed list of configurable items within the printer settings menu.
Settings for display language and character code pages.
Configuration options related to label formatting and positioning.
Various settings for device, printer control, and optional modules.
Configuration for Buzzer, Baud Rate, Serial Port, LAN, LCD, and Clock.
Settings for printer control functions and using the wizard mode.
Options for Bluetooth connectivity and running printer tests.
Understanding printer status and resolving errors via LCD.
Understanding the "Ready" status and error messages displayed on the LCD.
Explanations of navigation and lock/unlock icons on the LCD interface.
Procedures for calibrating labels and performing self-tests.
Automatic detection and storage of label height for optimal printing.
Procedure to perform a self-test to check printer functionality.
Using the hardware button for label calibration.
How to use the hardware button for label calibration.
Comprehensive guide to printer error alerts and their resolutions.
Table detailing printer error types, their causes, and solutions.
Using USB ports for memory sticks, keyboards, scanners, and firmware updates.
Using USB ports for memory sticks, keyboards, and scanners.
Steps for updating the printer's firmware using a USB memory stick.
Operating the printer with USB keyboards and scanners.
Operating the printer with USB keyboards and scanners.
Step-by-step guide to install the NetSetting utility for network configuration.
Step-by-step guide to install the NetSetting utility for network configuration.
Navigating the NetSetting interface for network management.
Initial screen displaying connected printers and basic network information.
Configuring IP address, gateway, and other network settings.
Configuring notification settings for printer alerts.
Setting up SMTP and SNMP for sending alert messages.
Selecting specific error cases for notification.
Choosing specific error cases for notification via SMTP or SNMP.
Remotely configuring printer settings using NetSetting.
Adjusting key printer settings remotely using the NetSetting software.
Sending commands to the printer for remote control.
Using the terminal to send commands for printer control.
Process for updating printer firmware remotely.
Process for downloading and installing firmware updates remotely.
Pre-installation steps for optional printer modules.
Pre-installation preparations for optional modules.
Step-by-step guide to install the cutter module.
Components and initial steps for installing the cutter module.
Removing cover plates and attaching the cutter assembly.
Connecting the cutter's cable and ensuring proper module insertion.
Connecting the cutter's cable and ensuring proper module insertion.
Securing the cutter and loading the label roll.
Securing the cutter and loading the label roll.
Diagram showing the installation process for parallel or applicator modules.
Diagram showing the installation process for parallel or applicator modules.
Steps to enable the printer's LPT port function via software.
Steps to enable the printer's LPT port function via software.
Detailed steps for installing label dispenser and liner rewind modules.
Detailed steps for installing label dispenser and liner rewind modules.
Procedure for installing the optional Bluetooth module.
Procedure for installing the optional Bluetooth module.
Procedure for installing the optional Wi-Fi module.
Procedure for installing the optional Wi-Fi module.
Steps to configure the Wi-Fi module after installation.
Steps to set up the Wi-Fi module after installation.
Guide to configuring a D-Link access point for Wi-Fi connection.
Guide to configuring a D-Link access point for Wi-Fi connection.
Instructions for using the Wi-Fi Tool to configure the printer.
Instructions for using the Wi-Fi Tool to configure the printer.
Ensuring Wi-Fi Tool parameters match the Access Point configuration.
Ensuring Wi-Fi Tool parameters match the Access Point configuration.
Verifying the Wi-Fi connection status and LAN information.
Confirming a successful Wi-Fi connection by checking the status icon.
Verifying related LAN information from the printer's LCD panel.
Establishing a computer-printer connection using Wi-Fi.
Establishing a computer-printer connection using Wi-Fi.
Steps for operating the liner rewind function.
Steps for operating the liner rewind function on the printer.
Procedure for removing the liner roll from the printer.
Procedure for removing the liner roll from the printer.
Procedures for installing and removing the print head module.
Detailed steps for installing and removing the print head module.
Adjusting the print line for optimal print quality.
Procedures for adjusting the print line for optimal print quality.
How to adjust the ribbon tension for proper ribbon feeding.
How to adjust the ribbon tension for proper ribbon feeding.
Instructions for cleaning the thermal print head to maintain print quality.
Instructions for cleaning the thermal print head to maintain print quality.
Adjusting print head pressure for even ink distribution.
Adjusting print head pressure for even ink distribution.
Modifying ribbon shield settings to correct ribbon wrinkling.
Modifying ribbon shield settings to correct ribbon wrinkling.
Procedures for maintaining the cutter assembly.
Procedures for cleaning and maintaining the cutter assembly.
Comprehensive guide to identifying and resolving printer problems.
A comprehensive guide to identifying and resolving printer problems.
Detailed technical specifications for different printer models.
Detailed technical specifications for different printer models.
Pinouts and settings for parallel and serial port connections.
Pinouts and settings for parallel and serial port connections.
Pinout diagrams for USB, Ethernet, and applicator interfaces.
Pinout diagrams for USB, Ethernet, and applicator interfaces.
General| Color | - |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 600 x 600 DPI |
| Maximum print height | 660 mm |
| Maximum printing width | 104 mm |
| Display | LCD |
| Control type | Touch |
| Product color | Black |
| Backlight color | Green |
| Backlight display | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Optional connectivity | Bluetooth |
| USB 2.0 ports quantity | 3 |
| Flash memory | 128 MB |
| Internal memory | 32 MB |
| Built-in barcodes | 1D, 2D, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, Data Matrix, EAN128, EAN13, EAN8, ITF, ITF-14, Industrial 2/5, Interleaved 2/5, MaxiCode, Micro QR Code, MicroPDF417, PDF417, POSTNET, QR Code, UPC-A, UPC-E |
| Ribbon width | 70 mm |
| Core diameter | 57.5 mm |
| Media thickness | 0.06 - 0.25 mm |
| Maximum label width | 118 mm |
| Maximum label length | 450 m |
| Maximum roll diameter | 203.2 mm |
| Mobile operating systems supported | Android, Windows Mobile |
| Windows operating systems supported | Windows 2000, Windows 7 Home Basic, Windows 8.1, Windows Vista Home Basic, Windows XP Home |
| LED indicators | Ready |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 5 - 40 °C |
| Storage relative humidity (H-H) | 10 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 465 mm |
|---|---|
| Width | 270.71 mm |
| Height | 308.2 mm |
| Weight | 13600 g |
To Next Page
