Godex GS550 - 3. Input;Output Settings

3 - 1
3. Input/Output Settings
Power Up Beeper
The scanner can be programmed to beep when it’s powered up. Scan the Off
bar code(s) if you don’t want a power up beep. Default = Power Up Beeper On
- Scanner.
Power Up Beeper Off -
Scanner
Trigger Click
* Power Up Beeper On -
Scanner
To hear an audible click every time the scanner button is pressed, scan the Trig-
ger Click On bar code below. Scan the Trigger Click Off code if you don’t
wish to hear the click. (This feature has no effect on serial or automatic trigger-
ing.) Default = Trigger Click Off.
*Trigger Click Off
Trigger Click On