Godex GS550 - Code 93 Code Page

To Next Page

To Previous Page

6 - 14

which the bar codes are read, deleting the first space from each. The

scanner transmits the appended data when it reads a Code 93 bar code

that starts with a character other than a space. Default = Off.

Code 93 Code Page

* Off

Code pages define the mapping of character codes to characters. If the

data received does not display with the proper characters, it may be

because the bar code being scanned was created using a code page that

is different from the one the host program is expecting. If this is the case,

scan the bar code below, select the code page with which the bar codes

were created (see Code Page Mapping of Printed Bar Codes on page A-6),

and scan the value and the Save bar code from the Programming Chart on

the inside the back cover of this manual. The data characters should then

appear properly.

Code 93 Code Page

Other manuals for Godex GS550