EasyManua.ls Logo

Godox Knowled M300Bi - Page 2

Godox Knowled M300Bi
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Foreword
Thank you for purchasing!
Godox M200Bi/M300Bi is a LED Light product with superior performance. It has a
separation design of light body and controller, wide color temperature range, high
brightness, low consumption, high power, ultra-high CRI and various dimming curves
functions, quite suitable for large photo studios, broadcast studios, outdoor or
large-scale field scenes.
Features:
• Strong power to create bright light output.
• 0-100 stepless brightness adjustment controls the brightness in subtle scenes.
• Wide color temperature range from 2800K-6500K
• 4 dimming curves: linear, S-curve, exponential, and logarithmic.
• Bowens mount is perfectly compatible with more optical accessories.
• Various professional control methods: Bluetooth control/DMX512 remote
control/2.4G wireless control.
• Super high color rendering index: CRI≥96, TLCI≥97
• 21simulated light effects: flash, lightning, TV, broken bulb, candle, fire, firework, etc.
• Two power supply methods: AC power supply (100V~240V)and V-mount battery
power supply (14.8V or 26V).
• The side with yellow battery removal button supports unilateral power supply.
• 2.4 inches TFT panel,4 buttons, 1 knob, clear UI interface.
Warning
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be sent
to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Do not leave or store the product if the ambient temperature reads over 40°C.
Do not use the product in the presence of flammable gases, chemicals and other
similar materials.
CAUTION: Hot parts!When the product is always on and flickering,please do not
touch the high temperature part of the LED head.
When replacing product accessories,please turn off the LED light and perform a
cold cut.
The light source contained in this luminaire shall only be replaced by the manufac
turer or his service agent or a similar qualified person.
The lamp shall be changed if it has become damaged or thermally deformed.
The luminaire is intended for professional use only.
SAVE THESE INSTRUCTIONS
25 26

Related product manuals