To Next PageTo Next Page
Need help?Do you have a question about the Godox MS200 and is the answer not in the manual?
General| Brand | Godox |
|---|---|
| Model | MS200 |
| Category | Camera Flash |
| Language | English |
Safety instructions to prevent product damage, injury, and ensure proper usage.
Details the physical components and external features of the flash unit's body.
Explains the various indicators and information displayed on the LCD panel.
Lists the accessories that are included with the main product.
Lists optional accessories that can be purchased to enhance product functionality.
Steps for setting up the flash unit, including installing covers and mounting.
Instructions on connecting the flash unit to an AC power source and turning it on.
Explains modes (OFF, PROP, Percentage) and brightness adjustment for the modeling lamp.
Details on using the select dial to adjust flash power output from 1/32 to 1/1.
Describes how to use the test button to fire the flash or check its brightness.
Information on using the sync cord jack for synchronous firing with a camera shutter.
Explains how to adjust wireless group and channel settings using the GR/CH button.
Details S1 and S2 optic slave trigger modes for synchronized flash firing.
Explains the sound function for ready flash notification after recharging.
Details button combinations for wireless transmission and factory reset.
Lists and explains error codes (E0, E3) and troubleshooting advice.
Explains how the device remembers panel settings for 3 seconds after setup.
Describes automatic flash shutdown and temperature alarm when overheating.
Explains built-in 2.4G wireless transmission and control with X1/XT16 triggers.
Step-by-step guide to setting the wireless communication channel for the flash unit.
Step-by-step guide to setting the wireless communication group for the flash unit.
Detailed steps for safely replacing the flash tube, including precautions.
Guidelines for device shutdown, cleaning, and general upkeep.
