To Next PageTo Next Page
Need help?Do you have a question about the Godox V1 N PRO and is the answer not in the manual?
General| Brand | Godox |
|---|---|
| Model | V1 N PRO |
| Category | Camera Flash |
| Language | English |
Identifies and labels the physical components of the flash unit's body.
Details the buttons and controls on the flash unit's operating panel.
Instructions for inserting and removing the flash unit's battery.
How to check the remaining battery charge on the LCD panel.
Information on power saving and automatic shut-off features.
Automatic flash exposure control based on camera metering.
Adjusting flash output for TTL mode to correct exposure.
Synchronizing flash with high shutter speeds for fill-flash.
Using flash as a slave unit triggered by the first flash.
Using flash as a slave unit triggered by the second flash.
Configuring the flash mode for the transmitter unit.
Adjusting the wireless channel to avoid interference.
Configuring the V1 Pro N as the main transmitter unit.
Setting up a V1 Pro N as a receiver unit.
Using the sync cord jack for wired triggering.
Previewing lighting effects by firing the flash for 1 second.
Enabling the AF-assist beam for low-light focusing.
Directing flash light off surfaces for softer lighting.
Solutions for when the flash unit fails to fire.
Troubleshooting automatic power-off issues.
Solutions for when the auto zoom function is not operating.
