Godox X2T-P - Compatible Camera Models List

Compatible Flash Models
The relationship of XT wireless system and X2 wireless system:
XT-16
(Code Switch)
X2
(Display Screen)
ON
CH01 CH02 CH03 CH04 CH05 CH06 CH07 CH08
X2
(Display Screen)
CH09 CH10 CH11 CH12 CH13 CH14 CH15 CH16
ON ON ON ON ON ON ON
XT-16
(Code Switch)
ON ON ON ON ON ON ON ON
1. This table only lists the tested camera models, not all Pentax series cameras. For the compatibility
of other camera models, a self-test is recommended.
2. Rights to modify this table are retained.
This flash trigger can be used on the following Pentax series camera models:
Compatible Camera Models
K-1645ZK70K50KPK-S2K-3II
Technical Data
X2T-P
Pentax cameras (TTL autoflash)
Support for the cameras that have PC sync socket.
iphone, Huawei, Samsung(see the compatible smartphone models for details)
2*AA batteries
Yes
Yes
Yes
Yes
Yes, ±3 stops in 1/3 stop increments
Yes
Yes
Yes
Yes
Control the beeper by the flash trigger The receiver end can control the
camera shooting through the 3.5mm sync cord jack
Adjust the ZOOM value by the transmitter
Upgrade through the Type-C USB port
Settings will be stored 2 seconds after last operation and recover
after a restart
Model
Compatible cameras
Compatible smartphone
(sync flash in M mode)
Power supply
Flash Exposure Control
TTL autoflash
Manual flash
Stroboscopic flash
Function
High-speed sync
Flash exposure
compensation
Flash exposure lock
Focus assist
Modeling lamp
Beeper
Wireless shutter
ZOOM setting
Firmware upgrade
Memory function
- 44 -
- 43 -