Goes Cobalt - EPS System Faults

21
22
23
24
25
26
35
36
Troubleshooting
Code
Suggestion
33
34
32
Main torque sensor disconnection
Main torque sensor output error(voltage is too high or low)
Vice torque sensor disconnected
Vice torque sensor output error(voltage is too high or low)
Main and vice torque difference is too large
Main torque sensor inner fault
Current sensor zero offset is too large
Motor disconnected
Current of ECU is over the limit
One side of motor has no assistance
Motor power-assistance abnormal
Diagnosis content
1.Check sensor wiring harness
2. Replace ECU
1.Check sensor wiring harness
2. Replace ECU
1.Check sensor wiring harness
2. Replace ECU
1.Check sensor wiring harness
2. Replace ECU
1.Check sensor wiring harness
2. Replace ECU
Exchange ECU
Re-insert wire of the motor
Exchange ECU
Exchange ECU
Exchange ECU
1.Check motor wire
2.Check motor plu
EPS fault code table
-141-