GoFish Cam - Troubleshooting Continued; Indicator Lights and Recording Issues

switching the power switch to the off
(middle) position this is not an error.
Move the power switch to the off
position, Press the WiFi button and
the record/mode position
simultaneously and the unit will turn
off. This is called the Manual Reset
function.
Light Indicators
Problem
Check Points
Rapid flashing of right indicator light
This means that the unit is either:
● low on battery and needs to be re-
charged.
● The microSD card in the unit is
corrupt or does not meet the required
standards as outlined in this User
Manual. Try formatting the microSD
card or replacing it with a new one
that is suitable to the outlined
standards.
Recording
Problem
Check Points
This unit suddenly stops recordings
● The unit either stopped recording
because the battery died, or
● The unit stopped recording because
the memory card is full
Color balance, brightness of footage is
strange and unclear
In waters that are not clear, when there is
excessive light the footage may be
out of focus or strange looking. Try
changing the white balance settings
from the "GoFish Cam App"
I can not hear any sound in my recording
This is not an error. Although GoFish
Cam does have a microphone, when
fully sealed you may not always be
able to hear any sound at all due to
the heavy duty housing and seals.
PLAYBACK
Problem
Check Points
When reviewing footage, my videos keep
cutting themselves at 1 minute lengths
This is not an error. The GoFish Cam is
programmed to record in 1 minute clips to
easily manage the experience through the