Gojo LTX User Manual

! Warning (In according to FCC part 15.19):
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that
may cause undesired operation.
! Caution (Pertaining to FCC part 15.21):
Modifications to this equipment not expressly approved by GOJO Industries, Inc. could
void the user's authority to operate the equipment.
This unit is certified to FCC Part 15 Part C for intentional unlicensed radiators. FCC ID O76-T4SG0910A
LTX
TM
Acvity Monitoring System
transmier module installaon procedure

Gojo LTX Specifications

General

Brand	Gojo
Model	LTX
Category	Measuring Instruments
Language	English

Summary

FCC Compliance and Safety Information

FCC Warning Statement

Device complies with FCC Part 15 rules, subject to conditions to avoid harmful interference.

FCC Caution Statement

Unauthorized modifications void user authority to operate equipment as per FCC part 15.21.

Transmitter Module Installation Procedure

Initial Door Release and Preparation

Steps 1-4: Release dispenser door, remove slot cover, and prepare for module insertion.

Module Placement and Antenna Routing

Steps 5-6: Remove module from packaging and feed antenna wire through retainers.

Securing Module and Cable Connection

Steps 7-9: Secure the module, ensure battery tab is present, and connect module cable.

Power Activation and System Test

Steps 10-11: Remove battery tab to power on, load refill, and check status light.