Need help?Do you have a question about the Gold Medal Cornado Popping Unit and is the answer not in the manual?
General| Brand | Gold Medal |
|---|---|
| Model | Cornado |
| Category | Commercial Popcorn Machine |
| Voltage | 120V |
| Popcorn Capacity | 240-320 one-ounce servings per hour (depending on model and kettle size) |
| Construction | Stainless Steel |
| Electrical | NEMA 5-15P |
| Production | 240-320 one-ounce servings per hour (depending on model and kettle size) |
Covers electrical safety, burn hazards, equipment alterations, and proper operation.
Details restrictions for minors and unauthorized personnel.
Advises contacting technical service for operational or service questions.
Procedures for unpacking and checking for shipping damage.
Details specific voltage and amperage requirements for domestic models.
Guides on connecting the oil pump and setting the oil amount.
Details minimum clearance and counter mounting requirements with diagrams.
Important notes on connecting bag connectors for the BIB system.
Instructions on how to program the oil amount for the BIB system.
Explains how to set oil amounts for models with Salt/Sweet option.
Explains Oil System Master, Salt-Sweet, and Red Oil Dispense switches.
Details the Kettle Motor and Kettle Heat switches.
Describes the Load/Dump Indicator light and audible signal.
Detailed steps for operating the machine to pop popcorn.
Instructions on responding to the Load/Dump indicator signals.
Procedures for safely turning off the machine after use.
Daily recommended procedure for cleaning the popping kettle.
Guidelines for cleaning the external stainless steel components.
Emphasizes water immersion prohibition, unplugging, and eye protection for service.
States that maintenance sections are for qualified service personnel only.
Explains the function and operation of the electronic temperature control.
Details factory adjustments for temperature, signals, and sound.
Instructions for aligning the kettle's drive shafts for proper operation.
Recommendations for ordering parts accurately, including model details.
Provides address, phone, fax, and email for ordering.
References specific page numbers for lid and dump chute components.
References specific page numbers for pedestal parts.
References specific page numbers for kettle components.
References specific page numbers for switchplate parts.
Illustrates and labels various general components of the popcorn machine.
Illustrates and labels components of the switchplate assembly.
Illustrates and labels parts specific to the 60 oz. model's heated oil line.
Shows and labels internal electronic components within the pedestal.
Illustrates the motor and associated wiring within the pedestal.
Illustrates and labels parts for the 36 oz. kettle assembly.
Illustrates and labels parts for the 48 oz. kettle assembly.
Illustrates and labels parts for the 60 oz. kettle assembly.
Shows and labels components at the bottom of the kettle.
Illustrates and labels the kettle lid and dump chute components.
Lists and provides part numbers for 36 oz. model components 1 through 25.
Lists and provides part numbers for 36 oz. model components 26 through 50.
Lists and provides part numbers for 48 oz. model components 1 through 25.
Lists and provides part numbers for 48 oz. model components 26 through 50.
Lists and provides part numbers for 60 oz. model components 1 through 25.
Lists and provides part numbers for 60 oz. model components 26 through 60.
Provides the electrical schematic for specific 36 and 48 oz. model configurations.
Details the electrical wiring schematic specifically for the 48 oz. model.
Presents the electrical wiring schematic for 60 oz. model configurations.
Outlines the terms, duration, limitations, and voiding conditions of the warranty.
Provides contact details for warranty service and inquiries.
To Next Page
