Need help?Do you have a question about the Gold Medal Pop-O-Gold and is the answer not in the manual?
General| Brand | Gold Medal |
|---|---|
| Model | Pop-O-Gold |
| Category | Kitchen Appliances |
| Language | English |
Machine must be properly grounded to prevent electrical shock.
Alterations can cause property damage, injury, or death.
Avoid burns; do not touch heated surfaces.
Always wear safety glasses when servicing equipment.
Refer servicing to qualified service personnel.
Understand operator's manual and safety instructions before use.
Limit public contact; only trained personnel may operate.
This machine is NOT to be operated by minors.
Check for transit damage and file claims immediately.
Read and understand the operator's manual and safety instructions.
Details on voltage, phase, and wiring for domestic models.
Information on ANSUL R-102 fire suppression systems.
Connect and calibrate the oil dispense system to the popper.
Operates all lights; interior and dome on your popcorn machine.
Operates the forced air popcorn crisping system.
Operates the heating elements in the popping kettle.
Operates kettle agitator motor and exhaust blower.
Sends power to the oil pump.
Dispenses the pre-set amount of oil into the kettle.
Alerts operator for loading, dumping, or turning off heat.
Adjusts kettle load for batch size (32oz or 18oz).
Changes temperature setting to 50ºF lower for sweet option.
Details popcorn and oil quantities for different kettle sizes.
Step-by-step guide for popping salted popcorn.
Instructions for popping 18 oz. batches using Flexi-Pop.
Instructions for popping sweet corn.
Procedure for daily cleaning of the kettle.
Instructions for daily cleaning of the first mesh filter.
Instructions for weekly cleaning of internal filters.
How to clean the bag and mesh filters in soapy water.
Grounding, water immersion, and unplugging precautions.
Alterations void warranty and cause danger.
Refer servicing to qualified service personnel only.
Following sections are for qualified service personnel only.
Potential causes for long popping cycles.
Checks for heating issues, including switches and leads.
Checks for agitator shaft rotation and clearance.
Checks for oil pump issues, including solid oil lines.
How the temperature control stops power to the kettle.
Details on factory adjustments for the control board.
Instructions on how to replace broken glass panels.
How the control stops power to the kettle.
Details on factory adjustments for the control board.
Setting for the overshoot circuit.
Adjusting the temperature setting for the beeper.
How to lower or stop the beeper sound.
How to select sweet temperature using jumpers.
Guidance for service personnel on troubleshooting common issues.
Important notes regarding potentiometer adjustment and wiring.
To Next Page
