Gold Note IS-1000 LINE - Factory Reset and Firmware Version

18
EN
DE
IT
|
FACTORY RESET
| AND FIRMWARE VERSION
To access the factory reset function or check
the firmware version, turn off the master
switch and then press and hold down the
SKC while turning the master switch back on.
FACTORY RESET
This function can bes used to set the default
values for each input.
Press SAVE to reset the IS-1000, press
CANCEL to exit the menu.
Please note: the factory reset will not
downgrade or reset the firmware version.
FIRMWARE VERSION
The firmware version is shown at the bottom
of the display.
Check the dedicated video guide on our
YouTube channel if you need more info.