RCA CONNECTION
The PA-10 can be connected to your audio
system via unbalanced RCA inputs or
balanced XLR inputs. The PA-10 is extremely
| PA-10 INSTALLATION
5
XLR CONNECTION
Press the BAL button on the rear of the
PA-10 to use the XLR connection.
SPEAKER RIGHT
GN Link
GN Link
SPEAKER RIGHT
SPEAKER LEFT
SPEAKER LEFT
DS-10
DS-10
PA-10
GN LINK
Control multiple units in
Master-Slave mode by
turning ON/OFF just one.
PA-10
When BAL is active, the
LED above turns blue.
flexible and you can set it up in a wide
variety of configurations, as shown in the
following pages.
IN
IN
To Next Page
Loading...
