3
MAIN FEATURES
| Frequency response: 20Hz – 20KHz
| +20 EQ presets, 4 custom setups (innite
variable curves), all with “Enhanced” option
@ +/- 0.3dB max.
| THD (Total Harmonic Distortion): <0.01%
MAX
| Signal to noise ratio: -100dB
| Dynamic range: 110dB
| Output impedance: 50Ω
| Subsonic lter: 10Hz/36dB octave (ON/
OFF)
| Mono/Stereo: Stereo, Stereo 180°, Mono,
Mono 180°, Mono L
| Channel Swapping: R/L, L/R
| IR receiver for multifunctional remote
control
AUDIO OUTPUTS
| 1x RCA
| 1x XLR
| 1x Output Stereo for Tube (balanced GN)
for optional TUBE-1012 & TUBE-1006
| TECHNICAL SPECIFICATIONS
POWER
| Power supply:
Dual-Mono linear power supply 100-240V
with automatic selection
| Power consumption:
30W
| PSU Input for external power supply Gold
Note PSU-1250 & PSU-1000
AUDIO INPUTS
| 2x RCA (0.1mV MC up to 8.0mV MM)
| 1x XLR (0.1mV MC)
| Load: 12 options [100KΩ, 75KΩ, 47KΩ,
33KΩ, 22KΩ, 1KΩ, 470Ω, 220Ω, 100Ω,
47Ω, 22Ω,10Ω]
| Capacitance: OFF, 100pF, 150pF, 220pF,
330pF, 470pF, 1000pF
| Gain: 65dB MC, 40dB MM with 7 options
[-9dB, -6dB, -3dB, 0dB, +3dB, +6dB, +9dB]
RCA IN 1: PHONO stereo unbalanced
RCA IN 2: PHONO stereo unbalanced
RCA IN 3: EXTERNAL LOAD/LINE stereo
unbalanced (external load for ne
adjustment applied for RCA 2 only,
or line)
XLR IN 1: PHONO stereo balanced
XLR IN 2: EXTERNAL LOAD/LINE stereo
balanced (external load for ne
adjustment or line)
To Next Page
Loading...
Need help?
General
